Skip to content

Universal Electronics Box - Printing guide

Note

Values below match the official print list spreadsheet. Use 0.2 mm layers and a 0.4 mm nozzle unless you are willing to experiment and likely waste filament.

Profile Wall count Top/bottom layers Nozzle Layer height Infill % Infill type
A (aesthetic) 3 5 0.4 mm 0.2 mm 20 Gyroid/Cubic
SS (semi structural) 4 5 0.4 mm 0.2 mm 25 Gyroid/Cubic
S (structural) 6 6 0.4 mm 0.2 mm 45 Gyroid/Cubic

Layer height and nozzle

Unless you are willing to experiment (and likely waste filament), use 0.2 mm layers.

Minimum wall thickness values assume a 0.4 mm nozzle. If you use a different nozzle diameter, recalculate wall counts.

File naming

  • Accent colour: filenames prefixed with [a] are intended for your accent filament.
  • Quantity: if a filename ends with x# (for example x4), that is how many copies you need for one enclosure.

Heat-set inserts

Parts that take M3 heat-set inserts are provided in variants for CNC-Kitchen-style inserts and Voron-style inserts. Print the STLs that match the inserts you purchased (look for Voron-Inserts in the filename).

CNC-Kitchen style Voron style
Reference depth / callout (mm) 4.600 5

Printed parts

Panels

Part name Part setting Quantity Material Accent Notes
[a]-Keystone-Blank-Insert-x4-A A 4 ABS Y This is a VORON DESIGN part Go check them out
Extrusion-Handle-x2-A A 2 ABS N
Front-Estop-cover-34mm-x1-SS SS 1 ABS N
Front-Inlet-Cover-x1-A A 1 ABS N
Front-Mid-Cover-x1-A A 1 ABS N
Panel-Clip-F-x2-A A 2 ABS N
Rear-Inlet-Cover-Voron-Inserts-x1-A A 1 ABS N
Rear-Inlet-Cover-x1-A A 1 ABS N
Rear-lower-cover-x1-A A 1 ABS N
Rear-Mid-Cover-x1-A A 1 ABS N

Mounts

Part name Part setting Quantity Material Accent Notes
Din-Rail-Enclosure-Mount-x4-A A 4 ABS N
LRS-350-DIN-Mount-x1-or-2-SS SS 1 or 2 ABS N If your VFD isn't too big i'd recommend printing 2
Scylla-Din-Adapter-Left-x1-SS SS 1 ABS N
Scylla-Din-Adapter-Left-Voron-Inserts-x1-SS SS 1 ABS N
Scylla-Din-Adapter-Right-x1-SS SS 1 ABS N
Scylla-Din-Adapter-Right-Voron-Inserts-x1-SS SS 1 ABS N
Scylla-Din-Mount-x2-SS SS 2 ABS N

Cable Channels

Part name Part setting Quantity Material Accent Notes
145mm-Lid-x4-A A 4 ABS N All of the cable ducts were made using THIS tool then modified further check it out
145mm-Tray-x4-A A 4 ABS N
165mm-Lid-x6-A A 6 ABS N
165mm-Tray-x6-A A 6 ABS N
Corner-Lid-x4-A A 4 ABS N
Corner-Tray-x4-A A 4 ABS N
T-Junction-Lid-x2-A A 2 ABS N
T-Junction-Tray-x2-A A 2 ABS N

Feet

Part name Part setting Quantity Material Accent Notes
TPU-Foot-x4-A A 4 TPU N