Sliding Door Assembly
Components Required
2 x Extrusion I
1 x Extrusion J
2 x M5 x 10 BHCS
Slide the panel into the extrusion grooves. It will fit loosely at this stage.
Components Required
1 x Panel 390 x 725
Components Required
1 x Extrusion J
2 x M5 x 10 BHCS
Affix panel brackets to the door frame using M3 x 10 SHCS bolts.
Components Required
4 x Panel Clip A
2 x Panel Clip K
20 x M3 x 10 SHCS
Repeat previous steps to create a second door panel.
Components Required
2 x Extrusion I
2 x Extrusion J
1 x Panel 390 x 725
4 x Panel Clip A
2 x Panel Clip K
4 x M5 x 10 BHCS
20 x M3 x 10 SHCS
Attach the two door panels using 2020 hinges. Add a second set of hinges to the right-hand edge to attach the door to the machine.
Components Required
12 x M5 x 10 FHCS
4 x 2020 Extrusion Hinge
Affix the two handles with M5 x 10 BHCS.
Components Required
2 x Door Handles
4 x M5 x 10 BHCS
Bolt the doornut to the left end of the door.
Components Required
2 x Doornut Body
4 x M3 x 10 SHCS
