Hardware Reference

Button Head Cap Bolt (BHCS)

Button head cap bolt wireframe

Metric fastener with a dome-shaped head and hex drive. Most commonly found in locations where a fastener makes direct contact with a printed part.

ISO 7380-1

Flat Head Countersunk Bolt (FHCS)

Flat head countersunk bolt wireframe

Metric fastener with a flat head and hex drive, designed to sit flush inside a countersunk hole. Most commonly found in locations where a fastener makes direct contact with a printed part.

ISO 10642

Socket Head Cap Bolt (SHCS)

Socket head cap bolt wireframe

Metric fastener with a cylindrical shaped head and hex drive. Most commonly found in locations where a fastener makes contact directly with either a metal part or in conjunction with a washer.

ISO 4762

Nyloc Hex Nuts

Nyloc hex nuts wireframe

Hex nuts couple with bolts to create a tight, secure joint. Nyloc nuts go one step further and cuddle your bolts like your mum used to when you were a child.

ISO 10642

Fan Screw CS-1

Fan screw CS-1 wireframe

A PC standard fan mounting screw. Exclusively used to hold the system cooling fans to the bottom panel.

Heat-set Insert

Heat-set Insert wireframe

Used to provide durable threads into plastic parts. To install, press the insert with a heated soldering tip until the heat-set insert is flush with the surface. As the plastic cools, it solidifies around the knurls and ridges on the insert for excellent resistance to torque and pull-out.